NEW BRAINDUMPS EMC D-SNC-DY-00 BOOK | D-SNC-DY-00 EXAM QUIZ

New Braindumps EMC D-SNC-DY-00 Book | D-SNC-DY-00 Exam Quiz

New Braindumps EMC D-SNC-DY-00 Book | D-SNC-DY-00 Exam Quiz

Blog Article

Tags: New Braindumps D-SNC-DY-00 Book, D-SNC-DY-00 Exam Quiz, Cert D-SNC-DY-00 Exam, New D-SNC-DY-00 Test Vce, New D-SNC-DY-00 Test Braindumps

VCE4Dumps have made sure that each EMC D-SNC-DY-00 exam questions are updated according to the latest EMC D-SNC-DY-00 exam criteria issued by EMC. Each EMC D-SNC-DY-00 exam question gets reviewed by EMC professionals many times to ensure incomparable accuracy. VCE4Dumps offer a demo version of the actual EMC D-SNC-DY-00 Exam Question only for customer satisfaction and the candidates can check the validity of the product before actually buying it.

Nowadays everyone is interested in the field of EMC because it is growing rapidly day by day. The D-SNC-DY-00 credential is designed to validate the expertise of candidates. But most of the students are confused about the right preparation material for EMC D-SNC-DY-00 Exam Dumps and they couldn't find real Dell SONiC Deploy Exam (D-SNC-DY-00) exam questions so that they can pass D-SNC-DY-00 certification exam in a short time with good grades.

>> New Braindumps EMC D-SNC-DY-00 Book <<

D-SNC-DY-00 Exam Quiz - Cert D-SNC-DY-00 Exam

In order to allow our customers to better understand our D-SNC-DY-00 quiz prep, we will provide clues for customers to download in order to understand our D-SNC-DY-00 exam torrent in advance and see if our products are suitable for you. We have free demo on the web for you to download. Our D-SNC-DY-00 Exam Guide deliver the most important information in a simple, easy-to-understand language that you can learn efficiently learn with high quality. Whether you are a student or an in-service person, our D-SNC-DY-00 exam torrent can adapt to your needs.

EMC Dell SONiC Deploy Exam Sample Questions (Q16-Q21):

NEW QUESTION # 16
Which network devices route unencapsulated user traffic in a symmetric IRB overlay network?

  • A. Source VTEP and destination VTEP
  • B. Autonomous system boundary router and source VTEP
  • C. Leaf router and spine router
  • D. Capability extended next hop router and leaf router

Answer: A

Explanation:
In a symmetric Integrated Routing and Bridging (IRB) overlay network, the Source Virtual Tunnel End Point (VTEP) and the Destination VTEP route unencapsulated user traffic. Symmetric IRB ensures that routing occurs at both the ingress and egress VTEPs, allowing for optimized traffic flow and efficient network operations.
References:
* Dell Technologies SONiC documentation
* VXLAN Configuration Guide


NEW QUESTION # 17
A customer must configure a peer link between two switches in the L2 MC-LAG scenario.
SwitchB has already been configured. Configure the peer link on SwitchA.
Use the following configuration information:
MC-LAG domain 1
VLAN 101
Peer link Port-Channel 100
SwitchA IP: 192.168.1.1/24
SwitchB IP: 192.168.1.2/24
MC-LAG system MAC: 00:00:00:11:11:11
The physical ports to connect the peer switch are Eth 1/5 and Eth 1/6 for each switch.

Answer:

Explanation:
see the explanation for all step by step solution with all explanation.
Explanation:
Here are the steps to configure the peer link on SwitchA:
* Enter Configuration Mode:
SwitchA# configure terminal
* Create VLAN 101:
SwitchA(config)# vlan 101
* Create Port-Channel 100:
SwitchA(config)# interface port-channel 100
SwitchA(config-if-po100)# switchport mode trunk
SwitchA(config-if-po100)# switchport trunk allowed vlan 101
SwitchA(config-if-po100)# exit
* Assign Physical Interfaces to Port-Channel 100:
SwitchA(config)# interface ethernet 1/5
SwitchA(config-if-eth1/5)# channel-group 100 mode active
SwitchA(config-if-eth1/5)# exit
SwitchA(config)# interface ethernet 1/6
SwitchA(config-if-eth1/6)# channel-group 100 mode active
SwitchA(config-if-eth1/6)# exit
* Configure MC-LAG Domain 1:
SwitchA(config)# mclag domain 1
SwitchA(config-mclag-domain)# peer-link port-channel 100
SwitchA(config-mclag-domain)# local-ip 192.168.1.1
SwitchA(config-mclag-domain)# peer-ip 192.168.1.2
SwitchA(config-mclag-domain)# system-mac 00:00:00:11:11:11
SwitchA(config-mclag-domain)# exit
* Save Configuration:
SwitchA# write memory
Comprehensive Detailed Step by Step Explanation with References:
* Enter Configuration Mode:
* Begin by entering the global configuration mode to make changes to the switch configuration.
* Create VLAN 101:
* Create VLAN 101 to be used for the MC-LAG peer link communication.
* Create Port-Channel 100:
* Enter the port channel interface configuration mode using interface port-channel 100.
* Set the port channel to trunk mode with switchport mode trunk.
* Allow VLAN 101 on the trunk with switchport trunk allowed vlan 101.
* Exit the port channel interface configuration mode.
* Assign Physical Interfaces to Port-Channel 100:
* Enter interface configuration mode for ethernet 1/5 and assign it to port channel 100 using the channel-group 100 mode active command.
* Exit the interface configuration mode.
* Repeat the same steps for ethernet 1/6.
* Configure MC-LAG Domain 1:
* Enter the MC-LAG domain configuration mode using mclag domain 1.
* Specify the peer link port channel with peer-link port-channel 100.
* Configure the local IP address as 192.168.1.1 using local-ip 192.168.1.1.
* Configure the peer IP address as 192.168.1.2 using peer-ip 192.168.1.2.
* Set the MC-LAG system MAC address using system-mac 00:00:00:11:11:11.
* Exit the MC-LAG domain configuration mode.
* Save Configuration:
* Save the configuration to ensure the changes persist after a reboot using the write memory command.
References:
* Dell Technologies Networking - SONiC
* Dell Enterprise SONiC Deployment Guide
These steps provide a comprehensive guide to configure the peer link for an MC-LAG scenario on SwitchA, ensuring the specific requirements for IP addressing, VLAN configuration, and port channel setup are met.


NEW QUESTION # 18
Refer to the exhibit.

Which three actions can a customer take to change interface Eth1/10 to operate in access mode for VLAN 40?

  • A. Configure the access mode for the switch port.
  • B. Enter it into the relevant interface.
  • C. Remove the current access VLAN configuration.
  • D. Delete VLAN 40.
  • E. Shut down the relevant interface.

Answer: A,B,C

Explanation:
* Configure the access mode for the switch port (A): This involves setting the switch port to operate in access mode.
* Remove the current access VLAN configuration (D): Before changing the VLAN, the current configuration must be cleared.
* Enter it into the relevant interface (E): Apply the new configuration to the specific interface, Eth1/10.
Steps:
* interface Ethernet 1/10
* no switchport access vlan <current VLAN> (Remove current VLAN)
* switchport mode access
* switchport access vlan 40
References:
* Dell Technologies SONiC documentation
* Dell Networking Configuration Guide


NEW QUESTION # 19
Use the simulator to perform the following configuration task.
1. Map a single-tagged CVLAN 100 to SVLAN 200 translation on PE
switch interface Eth1/1.
2. Map a double-tagged VLAN packet with an outer CVLAN 100 and an
inner dot1q 200 to SVLAN 300 translation on PE switch interface
Eth1/2.
The necessary VLANs and VLAN stacking have already been configured.

Answer:

Explanation:
see the explanation for all step by step solution with all explanation.
Explanation:
Here are the steps to configure the required VLAN translations on a Dell SONiC switch:
* Map a Single-Tagged CVLAN 100 to SVLAN 200 on Interface Eth1/1:
sonic# configure terminal
sonic(config)# interface Ethernet1/1
sonic(config-if-Ethernet1/1)# switchport mode trunk
sonic(config-if-Ethernet1/1)# switchport vlan mapping 100 200
sonic(config-if-Ethernet1/1)# end
sonic# write memory
* Map a Double-Tagged VLAN Packet with Outer CVLAN 100 and Inner dot1q 200 to SVLAN 300 on Interface Eth1/2:
sonic# configure terminal
sonic(config)# interface Ethernet1/2
sonic(config-if-Ethernet1/2)# switchport mode trunk
sonic(config-if-Ethernet1/2)# switchport vlan mapping 100 200 300
sonic(config-if-Ethernet1/2)# end
sonic# write memory
Comprehensive Detailed Step by Step Explanation with References:
* Enter Configuration Mode:
* Access the global configuration mode using the configure terminal command.
* Configure Interface Eth1/1:
* Enter interface configuration mode for Ethernet1/1 using the command interface Ethernet1/1.
* Set the switchport mode to trunk with the command switchport mode trunk.
* Configure the VLAN translation using the switchport vlan mapping 100 200 command, which maps CVLAN 100 to SVLAN 200.
* Exit the interface configuration mode by typing end.
* Save the configuration with write memory.
* Configure Interface Eth1/2:
* Enter interface configuration mode for Ethernet1/2 using the command interface Ethernet1/2.
* Set the switchport mode to trunk with the command switchport mode trunk.
* Configure the double-tagged VLAN translation using the switchport vlan mapping 100 200 300 command, which maps packets with outer CVLAN 100 and inner dot1q 200 to SVLAN 300.
* Exit the interface configuration mode by typing end.
* Save the configuration with write memory.
References:
* Dell Technologies Networking - SONiC
* Dell Enterprise SONiC Deployment Guide
These steps provide a comprehensive guide to configure VLAN translations on a Dell SONiC switch, ensuring that the specific requirements for single-tagged and double-tagged VLAN mappings are met.


NEW QUESTION # 20
What are the supported modes for the QSFP28 ports on an S5248F?

  • A. 1x200G, 1x100 G, 1x40 G, and 4x25 G
  • B. 1x100G, 1x40 G, 2x50 G, and 4x25 G
  • C. 1x100G, 1x40 G, 4x25 G, and 4x10 G
  • D. 1x400G, 2x200 G, 4x25 G. and 4x10 G

Answer: B

Explanation:
The QSFP28 ports on an S5248F switch support multiple modes, including 1x100G, 1x40G, 2x50G, and
4x25G. These modes provide flexibility in network design and enable the switch to support different types of network connections and bandwidth requirements.
References:
* Dell S5248F Switch Data Sheet
* Dell Technologies InfoHub


NEW QUESTION # 21
......

Our company is professional brand established for compiling D-SNC-DY-00 exam materials for candidates, and we aim to help you to pass the examination as well as getting the related certification in a more efficient and easier way. Owing to the superior quality and reasonable price of our D-SNC-DY-00 Exam Materials, our company has become a top-notch one in the international market. Our D-SNC-DY-00 exam torrents are not only superior in price than other makers in the international field, but also are distinctly superior in the following respects.

D-SNC-DY-00 Exam Quiz: https://www.vce4dumps.com/D-SNC-DY-00-valid-torrent.html

Most candidates will choose to pass the D-SNC-DY-00 just for one time, so the most important work is the exam cram with high passing grade, Our D-SNC-DY-00 study dumps could bring huge impact to your personal development, because in the process of we are looking for a job, hold a certificate you have more advantage than your competitors, the company will be a greater probability of you, We guarantee you 100% pass exam with our actual D-SNC-DY-00 study guide.

Our products will help you save time and prepare well to clear exam, Creating Your Shop, Most candidates will choose to pass the D-SNC-DY-00 just for one time, so the most important work is the exam cram with high passing grade.

D-SNC-DY-00 valid study dumps &D-SNC-DY-00 actual prep torrent

Our D-SNC-DY-00 Study Dumps could bring huge impact to your personal development, because in the process of we are looking for a job, hold a certificate you have more D-SNC-DY-00 advantage than your competitors, the company will be a greater probability of you.

We guarantee you 100% pass exam with our actual D-SNC-DY-00 study guide, You won't require a live internet connection to use the desktop EMC exam simulation software once you've verified the product's license.

The EMC D-SNC-DY-00 practice material comes in three formats, desktop D-SNC-DY-00 practice test software, web-based D-SNC-DY-00 practice exam, and D-SNC-DY-00 Dumps PDF that cover all exam topics.

Report this page